If you prefer to vaporize your CBD oil, you will notice that after some time the flavor reduces. When this happens, consider priming your vape. Priming the vaporizer entails pre-saturation of the wicking material that holds the CBD oil before utilizing it. The moisture prevents the wicking material from burning and overheating. It also enables the wick to absorb the CBD oil more uniformly and fluidly from the tank and take it to the coil.
Some interior designs, especially those of the newer models, take longer for the e-liquid to be absorbed than others. If you wish to reduce the burnt taste or having a ruined coil, consider these simple priming tips.
How to Properly Prime a Coil
The process of priming is quite straightforward and easy.
Step two: Attach the New atomizer Coil
After disposing of the oil coil, screw the new one in its place. It will offer a place to hold onto when you will be adding the CBD oil into the coil. It will also ensure that the oil does not get to your fingers since screwing it on after saturating the wick might make it get to your fingers too.
Step Three: Saturate the Wicking Material
Next, you need to locate the oil holes in the body of the atomizer head, which is where the wick touches the oil. While some coils are made such that they have the cord behind them, others have the cotton sticks out of The holes. In both cases, the wicking material is easily visible as it is exposed. Add a single drop of The CBD oil to every hole to saturate the wick uniformly.
The next step involves saturating the cotton wool with the oil. The amount required to soak the wicks completely varies from the specific kind of atomizer you are using. Smaller atomizer coils like Aspire Nautilus require a drop or two of The CBD oil. The more significant types, which use tanks such as Cloud Beast, need more than a drop to achieve total saturation. You will know that the wick has reached saturation when you add CBD oil but the cotton does not absorb it. Avoid over-saturation since it might result in flooding and cause the liquid to enter your mouth. Remember that your primary target is not to drench the loop but rather to saturate the cotton.
Step Four: Take a Few Dry Hits
When you finish filling and reassembling the tank, attach it to the battery. The next stride in priming your clearomizer is to take between four and five hits. Taking a dry hit refers to taking to taking a drag when the fire button of your battery is off. To do this, all you need to do is to tighten the air valve, if your tank has one, and then cover the air hole using your hand. With your vaporizer in this state, take four to five regular drags. When you do this, you siphon CBD oil into the cotton from the tank. However, ensure you neither take very strong or deep hits nor take more than five. Doing contrary to this might make the loop to flood.
Step Five: Break-in the Coil
Besides saturating the wicking material, another benefit of priming the loop is to break-in the new wire correctly. Considering that the cable will expand when heated and contract when cooled, it is crucial to break-in the wire too. To achieve this, you need to start using the new loop at a lower voltage than the one you usually use. After taking a few hits, you may increase the voltage gradually until you attain the regular power setting. It is also beneficial to make shorter hits especially for the first ten drags, to ensure that the wire does not get excessively hot. The gradual increase in voltage, as well as the puff duration, will provide proper priming of the loop well as the yarn.
